YAMON> help

Available commands :

.           . (repeat last command line)
;           ; (command separator)
+           + <repeat count> ;
cache       cache [ <value> | off | on | wb | wt ]
cksum       cksum <address> <size>
compare     compare <address1> <address2> <size>
copy        copy [-f] <src> <dst> <size>
cp0         cp0 [ (<name> | ([-<0..7>] <regnum>)) [<value>] ]
cp1         cp1 [ (<name> | <regnum>) [<value>] ]
dis         dis [-m] [-16] <address> [<count>]
dump        dump [-m][-8|-16|-32] <address> [<size>] |
                 romfs <start_addr>
echo        echo <data>
edit        edit [-8|-16|-32] <address>
erase_nand  erase_nand block_no page_no len
fill        fill [-8|-16|-32] <address> <size> <data>
flush       flush [-i|-d]
fread       fread  tftp://<ipaddr>/<filename> <address>
fwrite      fwrite tftp://<ipaddr>/<filename> <address> <size>
go          go [?|.|<address> [<args>]]
gr16        gr16 <gbus-address>
gr32        gr32 <gbus-address>
gr8         gr8 <gbus-address>
gw16        gw16 <gbus-address> <data>
gw32        gw32 <gbus-address> <data>
gw8         gw8 <gbus-address> <data>
help        help [<command>]
ikc         ikc (load <image_key> <source KV addr.> <load_size>) |
                (unload <image_key>) |
                (start <itask_key> <image_key> <a0> <a1> <a2> <a3>
                 [<priority>] [<flag>] |
                (kill <itask_key> |
                suspend <itask_key> |
                resume <itask_key> |
                setpriority <itask_key> <priority> |
                info <itask_key> |
                regdump <itask_key> |
                cache <dump gbus addr.> |
                ps | version | ub | pause | logfifo | monitor | meminfo |

load        load (uu [-z] <address>) |
                 (romfs [-z] <romfsaddr> <filename> [<loadaddr>]) |
                 (zbf <address> [<loadaddr>]) |
                 [-r] (-b tftp://<ipaddr>/<filename(bin)> <loadaddr>) |
                      (tftp://<ipaddr>/<filename(srec)>) 
                 (asc:[//(tty0|tty1)])
map_nand    map_nand
net         net (init [<port>] [phy=<phy_addr>] )
                ( up )|
                ( down )
nflash      nflash  ( read [-p] <flash offs addr> <ram addr> <length> <CS>) |
                    ( write [-p] <flash offs addr> <ram addr> <length> <CS>) |
                    ( write -r|-sr|-or <ram addr> <length> <CS>) |
            		  ( erase [-p] <offset> <length> <CS>) |
            		  ( erase -r|-sr|-or <start block> <number of blocks> <CS>) |
            		  ( format [ [show] | [percent=<number>] ] <CS> )
pcicfg      pcicfg [-8|-16|-32] ([-r] <bus> <dev> <func> <addr> [<range>]) |
                                ( -w  <bus> <dev> <func> <addr> <val>) |
                   (init | disp ) --mambo host 
                   (dmawrite | dmaread) -- PC host

ping        ping ipaddr [<datagramsize>]
port        port [-a] [-8|-16|-32] <address> [<value>]
progm_nand  progm_nand
read_nand   read_nand block_no page_no len
reboot      reboot [-s <seconds>]
satadisk    satadisk [-f] (id [sd0|sd1])|
                 (readdma  sd0|sd1 <sector> <count> <addr> <max sectors in DMA>
            )|
                 (writedma sd0|sd1 <sector> <count> <addr> <max sectors in DMA>
            )

scpu        scpu ( [-i|-d|-m]+ [-a|-u|(-r|-p)+] ) |
                 ( (-i|-d) <bpw> [<assoc>] [-p] ) |
                 ( (-i|-d) <assoc> [<bpw>] [-p] ) |
                 ( (tlb|fixed) [-p]             )
search      search [-asc|-hex] <address> <size> <string>
setenv      setenv [<variable> [<value>]]
setxenv     setxenv [-b] [-a <address>] [<key> [<value>]]
            setxenv [-mb] [-a <address>] [<key> [<value1> <value2> ... ]]
            setxenv [ -k <key> ] [ -m <address> -l <length> ]
            setxenv [ -k <key> [ -l <length> ] ]
sleep       sleep <ms>
stty        stty [-tty<0|1>] [-b|-u|[-p][<baudrate>][n|o|e][7|8][1|2][hw|none]]
tlb         tlb ( -i [-s] ) | ( <index> <pagesize> <va> <g> <asid>
                                <pa0> <c0> <d0> <v0>
                                <pa1> <c1> <d1> <v1> )
unsetenv    unsetenv  <variable> | (-u|-s)
unsetxenv   unsetxenv [-a <address>] <key>
watch       watch s/l/i address
write_nand  write_nand block_no page_no len
xkc         xkc (xload <lkey> <source KV addr.> <xload_size>
                 <dest. gbus addr.>) |
                (xunload <lkey>) |
                (xbind <source KV addr.> <xload_size>) |
                (xstart <tkey> <lkey> <a0> <a1> <a2> <a3>) |
                (xkill <tkey> [<sig>]) |
                (ustart <lkey> <dspid>) |
                (ukill <dspid> [<sig>]) |
                (chpll <pll0> <mux> |
                protregs | hello | random | ub | dst | formatall | pbusopen |
                (xpalloc <size>) |
                (xpfree <gbus addr.>)